IP44 Plastic Power Supply 48W P3
FEATURES
1. Constant Voltage
2. Double Insulated Class lI Power Supply
3. High Temperature Resistant Flame Retardant Plastic Shell
4. Waterproof GradeIP20/IP44/IP65 Chooseable
5. No Flicker, No Noise, Compatible With Various Controllers
6. Ultra-thin Design,Thickness Within 16.5mm
7. CE EMC ROHS CCC SAA CB UKCA ETL BIS ERP Certification
8. WorkingTemperature:-30~60℃
9. Over-Voltage, Over-Current,Short-Circuit Protection
SPECIFICAION
| MODEL | VUF-048-012P3 IP44 | VUF-048-024P3 IP44 | |||
| OUTPUT | DC VOLTAGE | 12V | 24V | ||
| RATED CURRENT | 4A | 2A | |||
| CURRENT RANGE | 0-4A | 0-2A | |||
| RATED POWER | 48W | ||||
| RIPPLE&NOISE(max) | <4.2V | ||||
| VOLTAGE TOLERANCE | ±0.5V | ||||
| INPUT | VOLTAGE RANGE | 100-265VAC | |||
| FREQUENCY RANGE | 47-63Hz | ||||
| POWER FACTOR(Typ.) | ≥0.95PF | ||||
| EFFICIENCY(Typ.) | 86% | ||||
| AC CURRENT(Typ.) | 0.25A/220VAC | ||||
| PROTECTION | Short circuit | Protection type:Hiccpe mode,recovers automatically after condition is removed | |||
| Overload | 4.3A | 2.2A | |||
| ENVIRONMENT | WORKING TEMP. | -30~+50℃ (Refer to output load derating curve) | |||
| INGRESS PROTECTION | IP44 design for indoor | ||||
| STORAGE TEMP | -40~+80℃ | ||||
| SAFETY&EMC | SAFETY STANDARDS | EN61347-1;EN61347-2-13;SELV;IP44 approved | |||
| WITHSTAND VOLTAGE | I/P-O/P:3.75KVAC I/P-FG:3.75KVAC O/P-FG:0.5KVAC | ||||
| EMC Test Standards | EN55015,EN61000-3-2,EN61000-3-3 | ||||
| EN61547 | |||||
| NOTE | 1.All parameters NOT specially mentioned are measured at 220VAC input,rated load and 25℃ of ambient temperature. | 
||||
| 2.Ripple&noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf&47uf parallel capacitor.  | 
|||||
| 3.Tolerance:includes set up tolerance,line regulation and load regulation. | 
|||||
